The Founding and Early Days previous

Ross-on-Wye

Woodville Polymer Engineering

Woodville
The site at Ross just after the company arrived
(Click for a larger image)

Woodville Polymer Engineering, known simply as "Woodville" by employees, was a firm which, as its name implied, specialised in the manufacture of Polymer based products, specifically working in rubber. It was established in 1948 and grew from a handful of employees working in a small garage until, 30 years later in 1980, it employed almost 900 employees in 3 plants producing a full range of elastomer and polymer products.


The company manufactured products from both natural rubber and a variety of synthetics. One of Woodville's largest volume products was a synthetic rubber-coated steel seal which was made for the bearing industry, where it was the seal for a lifetime, non-serviceable, sealed bearing. In 1980 it was making more than 1,000,000 of these seals each week.

The company was based in Ross-on-Wye, after moving there in 1961, but had other plants in Burton-on-Trent and Cinderford. The latter site made many of the steel inserts used in other Woodville products.

Woodville manufacturing
Rubber products being manufactured
Left to right are:
Ernie Gibbons – Ted Bennal – Ivor Meak – Peter Hobdon – Phil Margrets
(Click for a larger image)

The company had manufacturing specialisation in the following:-

  • Industrial Seals
  • Heat Exchangers
  • Photocopy & Stereo Systems
  • Engine Mounts

Industrial Seals

Rubber Seals
A variety of rubber seals
(Click for a larger image)

Industrial seals, other than bearing seals, constituted another large market for Woodville. A very large portion of all water pumps, which were used in large quantities by the motor industry, were made and assembled by the company and indeed were of the company's own design. Valve stem seals and shock absorber seals were some of the other Woodville products which are made for what was the huge British automotive industry.


Automotive Seals

Another key market was the automotive industry where Woodville produced and tested many different types of seals. Examples were rubber boots constant velocity (CV) joints, shock absorber seals, headlight seals and steering rack boots.

Rubber boots and seals
Rubber boots and seals
(Click for a larger image)
Testing the rubber boots
Testing the rubber boots
(Click for a larger image)

Heat Exchangers

Another important market was the plate heat exchanger industry where Woodville supplied the gaskets. These heat erohanger gaskets ranged up to 10 feet long by 3/8 inch thick. These were made from synthetic rubber as the gaskets needed to be able to function under extreme conditions.

Heat Exchangers in Saudi Arabia
Type R235 APV Paraflows during installation in a closed circuit water cooling system at a petroleum company in Saudi Arabia
(Click for a larger image)
Heat Exchangers in a Brewery
Five APV Paraflows used for cooling wort at the Courage Berkshire Brewery
(Click for a larger image)

Photocopy & Stereo Systems

In 1980 there was a large and growing market for Woodville to provide products for the photocopying industries, particularly Ranx Xerox, and also to the makers of tape recording systems, record players and stereophonic sound reproduction systems. Products made for these industries included rubber rollers and paper feed trains, drive wheels, pinch wheels, and tensioning rollers for sheet-fed and roll-fed duplicating machines. Woodville drive belts and rubber turntable mats were used by the British manufacturer, Garrard [ More details on Garrard ].

MoD & Tornados

One of Woodville's main acheivements was when it obtained an order from the Ministry-Of-Defence to provide the British armed forces with the wing slot seal for the Tornado multi-role, swing-wing combat aircraft, the first aircraft were delivered to the RAF and Luftwaffe on 5 June and 6 June 1979 respectively. Other products they supplied to the Ministry included the tank tracks for the Scorpian tank and rubber plug and socket systems used on board Navy Ships.

A tornado
A tornado in flight
(Click for a larger image)

Rolls Royce Engine Mounts

The engine of the Rolls Royce motor car sat on a specially designed Woodville rubber-bonded-to-metal mount, and some of the famed quietness of the car was attributable to this product. The company also produced flexible safety fuel tanks for racing cars like the Lola [ More on Lola ], which won both the 1978 Indianapolis 500 and Pocono 500 races.

Woodville exported about 30% of its annual output, principally to Europe and the Scandinavian countries. The remainder mostly bearing seals and heat exchanger gaskets, were exported to Australia and Japan.

The company had grown from being a mere family business to one of Europes leading producers of rubber products, and excelled in precision-engineered high-technoloy rubber and rubber-bonded-to-metal components. Woodville had extensive engineering capabilities and often designed new parts to meet customers needs, but it owed its position not only to its own efforts but also to two companies, both multi-nationals, who had been involved in take-overs of the company. The companies, Garlock and Colt Industries, were also specialists at producing precision parts and have assisted Woodville in their rapid expansion, Woodville have rewarded them by showing a massive increase in turnover and consequently profit.



The Founding and Early Days previous

Sources

Many of the details are taken from The History of Woodville Polymer Products by Gary Minton. Gary was doing a industrial placement, presumably as part of his education, when he created the original document. - Thanks to Dennis Eagles for supplying these details



[Page updated: Feb 15 2011 13:31:58]






Search the site

© Ross-on-Wye.com & TheVista.co.uk
2002-2012 All Rights Reserved
Guestbook :: Contact details :: RSS News Feed News Feed

Share this article
Facebook Digg Reddit Magnolia Yahoo Google Stumbleupon Technorati Delicious Newsvine
[ Page views: 18406 :: Total page views: 7206008 :: Total visits: 6611423 ]
[ Since: 22:55 29 July 2005 ]
[ Page gen. time: 0.1381 ][ Page enc: ][ SERVER - Load: 91% ]